0~10bar Capacitance Pressure Sensor 18mm 20mm,21mm intake and exhaust system vehicle thermal management
Durable Ceramic Pressure Sensor for Automotive Industry with 0.2-10Mpa Pressure Range and 5-24V Supply Voltage
A. Product description
Ceramic capacitance pressure sensor material selection of 96% ceramic, has strong corrosion resistance, impact resistance, high elasticity and other excellent characteristics, while the extremely high thermal stability of the ceramic makes its operating temperature range of-40℃ ~135℃.In the working process of the ceramic capacitance pressure sensor, it does not need to transfer the pressure through other media. The monitoring pressure acts directly on the ceramic diaphragm, and the electric capacity change between the base electrode and the diaphragm electrode is proportional to the pressure.When overload, the diaphragm reaches against the base without breaking. When the pressure recovers, its performance will not be affected, which completely solves the disadvantages of low-range overload failure. It is the replacement product of ceramic pressure resistance and diffusion silicon pressure sensor.
B.Main characteristic
Corrosion resistance, impact resistance, high stability, high temperature resistance, low hysteresis
Working pressure range: 0.2MPa ~ 10MPa
Range selection: 0.2Mpa,0.5Mpa,1Mpa,2Mpa,4Mpa,7MPa,10Mpa
Operating temperature: -40℃ ~ 140℃
Supply voltage: 5-24V
Nonlinearity:< ±6%FS
Repeatability:＜ 1.0% FS
Full scale sensitivity:(△C)3-8pF
Hysteresis: ±0.1%FS
Response time:＜5ms
Temperature characteristic: ＜0.01%FS /℃
Service life: more than 5 million pressure cycles
Working medium: air, oil, brake oil, gasoline, diesel, air conditioning refrigerant, etc
C. Applications :
Automotive oil sensor Automotive braking system
Automotive air conditioning system
New energy vehicle thermal management system
Automotive intake and exhaust system
Screw air compressor,
Variable frequency water pump system (water will affect the core capacity value,The core pressure surface to do special treatment)
Intelligent pressure cooker
Commercial variable frequency air conditioning
D．Part number
PS: TM-NTY21010 ,TM-NTF010 ,TM-NTYW21010 ,TM-NTY18010
TM-NT: Company brand
Y/F: Y : round Sensor
F : square Sensor,
YW : temperature pressure integrated Sensor
21: OD: 21mm
18: OD: 18mm
10: 10bar
1Mpa=10bar
| Part No. | Rang (MPa) | Overload pressure (MPa) | breakdown pressure (MPa) | Measuring capacitance (pF) | Shielding capacitance (pF) | Full scale capacity variation range (pF) | Remark |
| TM-NTY21002 | 0.2 | 0.36 | 0.56 | 22±3 | 12±3 | 5.5±2.5 | |
| TM-NTY21005 | 0.5 | 0.9 | 1.35 | 22±3 | 12±3 | 5.5±2.5 | |
| TM-NTY21007 | 0.7 | 1.2 | 2.05 | 22±3 | 12±3 | 5.5±2.5 | |
| TM-NTY21010 | 1.0 | 1.8 | 2.5 | 22±3 | 12±3 | 5.5±2.5 | |
| TM-NTY21015 | 1.5 | 2.7 | 3.75 | 22±3 | 12±3 | 5.5±2.5 | |
| TM-NTY21020 | 2.0 | 3.5 | 5.0 | 22±3 | 12±3 | 5.5±2.5 | |
| TM-NTY21030 | 3.0 | 4.8 | 7.4 | 22±3 | 12±3 | 5.5±2.5 | |
| TM-NTY21040 | 4.0 | 6.0 | 9.5 | 22±3 | 12±3 | 5.5±2 | |
| TM-NTY21070 | 7.0 | 10.5 | 17.5 | 22±3 | 12±3 | 5.5±2 | |
| TM-NTY21100 | 10.0 | 15.0 | 24.0 | 22±3 | 12±3 | 5.5±2 | |
| TM-NTF010 | 1.0 | 1.7 | 2.5 | 12±2 | 8.5±2.5 | 4±2 | |
| TM-NTF020 | 2.0 | 3.2 | 5.0 | 12±2 | 8.5±2.5 | 4±2 | |
| TM-NTF030 | 3.0 | 4.5 | 6.8 | 12±2 | 8.5±2.5 | 4±2 | |
| TM-NTF040 | 4.0 | 6.0 | 9.0 | 12±2 | 8.5±2.5 | 4±2 | |
| TM-NTY18007 | 0.7 | 1.2 | 2.0 | 22±3 | 12±3 | 5.5±2.5 | |
| TM-NTY18010 | 1.0 | 1.8 | 2.5 | 22±3 | 12±3 | 5.5±2.5 | |
| TM-NTY18015 | 1.5 | 2.5 | 3.75 | 22±3 | 12±3 | 5.5±2.5 | |
| TM-NTY18020 | 2.0 | 3.2 | 5.0 | 22±3 | 12±3 | 5.5±2.5 | |
| TM-NTY18030 | 3.0 | 4.5 | 7.5 | 22±3 | 12±3 | 5.5±2.5 | |
| TM-NTY18040 | 4.0 | 6.0 | 9.5 | 22±3 | 12±3 | 5.5±2.5 | |
| TM-NTYW21005 | 0.5 | 0.9 | 1.35 | 22±3 | 12±3 | 5.5±2.5 | |
| TM-NTYW21010 | 1.0 | 1.7 | 2.5 | 22±3 | 12±3 | 5.5±2.5 | |
| TM-NTYW21040 | 4.0 | 6.0 | 9.5 | 22±3 | 12±3 | 5.5±2.5 | |
E.SIZE UNIT: (MM)
1Mpa=10bar
1: Round (diameter 21 mm)
| | D1 (mm) | D2 (mm) | D3 (R/mm) | D4 (mm) | T1 (mm) | T2 (mm) |
| 0.2Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.16±0.08 | 1.3±0.2 |
| 0.5Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.23±0.08 | 1.3±0.2 |
| 0.7Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.25±0.08 | 1.3±0.2 |
| 1Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.33±0.08 | 1.3±0.2 |
| 1.5Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.42±0.08 | 1.3±0.2 |
| 2Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.46±0.08 | 1.3±0.2 |
| 3Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.58±0.08 | 1.3±0.2 |
| 4Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.68±0.08 | 1.3±0.2 |
| 7Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.89±0.08 | 1.3±0.2 |
| 10Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.05 | 4.99±0.08 | 1.3±0.2 |
Suggestion: The inner diameter of the sealed O-ring should be greater than 14.5 mm
2: Round (diameter 18 mm)
| | D1 (mm) | D2 (mm) | D3 (R/mm) | D4 (mm) | T1 (mm) | T2 (mm) |
| 0.7Mpa | 18.00±0.18 | 0.65±0.08 | 6.53±0.2 | 1.28±0.2 | 3.67±0.08 | 1.8±0.2 |
| 1Mpa | 18.00±0.18 | 0.65±0.08 | 6.53±0.2 | 1.28±0.2 | 3.70±0.08 | 1.8±0.2 |
| 1.5Mpa | 18.00±0.18 | 0.65±0.08 | 6.53±0.2 | 1.28±0.2 | 3.78±0.08 | 1.8±0.2 |
| 2Mpa | 18.00±0.18 | 0.65±0.08 | 6.53±0.2 | 1.28±0.2 | 3.84±0.08 | 1.8±0.2 |
| 3Mpa | 18.00±0.18 | 0.65±0.08 | 6.53±0.2 | 1.28±0.2 | 3.93±0.08 | 1.8±0.2 |
| 4Mpa | 18.00±0.18 | 0.65±0.08 | 6.53±0.2 | 1.28±0.2 | 4.02±0.08 | 1.8±0.2 |
Suggestion:
The inner diameter of the sealed O-ring should be greater than 12.0 mm
3: Warm pressure type (diameter 21 mm)
| | D1 (mm) | D2 (mm) | D3 (R/mm) | D4 (mm) | T1 (mm) | T2 (mm) |
| 0.5Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.23±0.08 | 1.3±0.2 |
| 1Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.33±0.08 | 1.3±0.2 |
| 4Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.68±0.08 | 1.3±0.2 |
Suggestion: The inner diameter of the sealed O-ring should be greater than 13.0 mm
4:Square
| | L1/(mm) | L2/(mm) | L3/(mm) | T1/(mm) | D2/(mm) | D3/(mm) | D4/(mm) |
| 1Mpa | 14.7±0.15 | 12.4±0.15 | 12.7±0.1 | 2.3±0.08 | 0.5 | 1.4 | 1.6 |
| 2Mpa | 14.7±0.15 | 12.4±0.15 | 12.7±0.1 | 2.36±0.08 | 0.5 | 1.4 | 1.6 |
| 3Mpa | 14.7±0.15 | 12.4±0.15 | 12.7±0.1 | 2.44±0.08 | 0.5 | 1.4 | 1.6 |
| 4Mpa | 14.7±0.15 | 12.4±0.15 | 12.7±0.1 | 2.48±0.08 | 0.5 | 1.4 | 1.6 |
Suggestion: The inner diameter of the sealed O-ring should be larger than 7.5mm and the outer diameter should be smaller than 12.0mm
F:
1. Notes before use
Ceramic capacitance pressure sensors may be damaged beyond the service conditions described in this specification, such as harsh working environment or overpressure, and must follow the instructions of this specification when used.
2. Welding precautions
Ceramic capacitance pressure sensor is a combination of ceramic and metal.The thermoplasticity of the ceramic body itself is poor, and the response to the heat is relatively fast. Under the condition of urgent cold and urgent heat, the ceramic body is easy to crack or virtual welding.Recommended welding conditions: when manual welding, the maximum power of constant temperature dering iron is 25W, welding temperature 280~320℃, welding time 3S, welding times less than or equal to 3 times.The ons shall be welded on a 120 degree heating table.
3. Storage method
To maintain the weltability of the pins and ensure the packaging material in good condition, the recommended storage conditions are as follows: storage temperature: 5~40℃; storage relative humidity: below 70%RH. Ceramic capacitance pressure sensor soldability decreases over time, even under ideal storage conditions, and therefore should be used within half a year from the date of delivery.
FAQ
| 1. Q: When can we get the reply? |
| Any inquiries will be replied within 24 hours. |
| 2. Q: Can i have samples? |
| A: Yes. Sample is surely ok. We can even send you free sample and you should only pay for the freight fee. |
| 3. Q: What about minimum order quantity? |
| A: We have no limit for MOQ, so you can even buy only 1 piece. Welcome to buy sample to test first. |
| 4. Q: What about delivery time? |
| A: We will send sample to you within 3 days. |
| Production for big quantity needs 20 to 25 days. And it also depends on product and quantity. |
| 5. Q: What about terms of payment? |
| A: Payment terms: T/T, west Union, Paypal and L/C etc. |
| 6. Q: How you will send the goods to us? |
| A: We will send the goods to you by Air (DHL, Fedex, UPS, TNT) and Sea shipping etc. |
| 7. Q: Are you trading company or manufacturer ? |
| A: We are in China buzzer manufactory |
| 8. Q: Do you support OEM and ODM services? |
| A: Yes, surely support. we can customize products according to the drawing. |
| 9. Q: Can you provide driven circuit? |
| A: Yes, of course sure. |
| 10. Q: Can you solve technical problems for us? |
| A: Yes, Our Technical team will try our best to support you. |
More details please connect with us:
Email:sales88@taimihk.com
WhatsApp/mobile:+86 13538467125
