2.4MHz 16mm 20mm Ultrasonic Atomizing Transducer For Humidifier
Ultrasonic Atomizing Transducer Description:
Piezoelectric ceramics are mainly used in the manufacture of
ultrasonic transducers, acoustic transducers, electro-acoustic
transducer, ceramic filters, ceramic transformer, ceramic
frequency, high voltage generator, infrared detectors, surface
acoustic wave devices, electro-optic devices, ignition and
detonation devices such as piezoelectric gyroscope..
Microporous atomizer
The microporous atomizing sheet utilizes the high frequency
vibration of the piezoelectric ceramic to drive the vibration of
the water particles to greatly spray the effect. Each microporous
atomized sheet is immersed in acetone before delivery, continuous
air vibration, high current overload, high temperature, continuous
load fogging. Our microporous atomized sheet is coated with a
special protective glaze layer, which is resistant to acid and
alkali. To prevent the silver layer from being corroded and
oxidized by liquid, non-toxic and environmentally friendly,
beautiful and beautiful.
| Ultrasonic Atomizing Transducer Application |
1: Application of positive and negative piezoelectric effect
2: Piezoelectric Ceramic Buzzer | Speaker
3: Piezoelectric ceramic pickup
4: Piezoelectric transformer
5: Piezoelectric ceramic igniter
6. Ultrasonic beauty equipment
7. Sonar, ultrasonic flowmeter
8. Ultrasound medical equipment
| Ultrasonic Atomizing Transducer Application |
1.It can produce negative ions and atomization at the same time,
can sterilize and deposit smoke.
2.The water mist produced is a cold mist with the effect of cooling
and humidifying the air.
3.Cold fog with a large amount of negative ions can immediately
improve the body's ability to absorb oxygen and emit carbon
dioxide. Combined with drug use, it can play a good auxiliary
therapeutic effect on respiratory diseases and asthma.
4.Through the action of negative ions, the cold mist generated can
not only quickly replenish the moisture required by the skin, but
also avoid the burn, aging and uncomfortable feeling caused by
steaming the face at high temperature. Allows you to nourish brain
cells while grooming, soothing stress, which is good for your
physical and mental health and keeps you young. This product will
release a large amount of negative ions during the ultrasonic
atomization process, combined with the floating smoke and dust in
the air, and electrostatically treated to precipitate and filter
it, which can effectively remove second-hand smoke, formaldehyde,
carbon monoxide, bacteria and other harmful substances and odors.
High concentration of negative ions can effectively kill harmful
bacteria suspended in the air, reduce the occurrence of diseases,
and purify the air. Fresh and natural, to protect human health. For
people in dry areas and air-conditioned rooms, the use of negative
ion fog spring oxygen bar can avoid dry skin, dry eyes, can quickly
relieve nervous tension, eliminate fatigue, and calm the brain,
prevent excessive water loss and water shortage. Accelerate the
phenomenon of aging of life. Scope of application: family,
air-conditioned rooms, beauty salons, hotels, hospitals, offices,
kindergartens, karaoke rooms, etc.
| Ultrasonic Atomizing Transducer Specification |
| Resonant Frequency(Note 1) | 1.70-30KHz±60KHz |
| Resonant Impedance(Note 1) | Max.5Ω |
| Capacitance (Note 2) | 1600±15%PF |
| Electromechanical Coupling Factor(kt,kp) | Kp=Min.25% |
| Mechanical quality(Qm) | Min.800 |
| Dielectric loss(tan) | Max.0.5% |
| Piezoelectric constant(C/N) | Min.300 |
| Operating Temperature | -20~70℃ |
| Srorage Temperature | -30~80℃ |
| Buzzer Soldering process | Soldering Parameter |
| Temp(℃) | Time(Sec.) | Times |
Inclusive Lead | | Reflow soldering | 230±10 | Above 170℃ time 40~70 | 2 |
| Wave soldering | 245±5 | 3~6 | 1~2 |
| Manual soldering | 330±10 | 1~2 | 1~2 |
Lead Free | | Reflow soldering | 245±15 | Above 180℃ time 40~70 | 3 |
| Wave soldering | 260±5 | 4~8 | 2~3 |
| | | | |
| * | Manual soldering | 350±10 | 1~3 | 2~3 |
| Ultrasonic Atomizing Transducer Product |
| Ultrasonic Atomizing Transducer Different Size |
Dimension (Outer Diometer*Inner Dimension * Thickness) | Capacity (pF) | Dielectric Loss- tg δ (%) | Resonant Frequency -Fr(kHz) | Coupling Factor - Kp(%) | Quality Factor-Qm | Application |
| Φ10*Φ5*2 | 330 | 0.3 | 145 | ≧0.4 | 800 | For Small Power Transducers: 1) ultrasonic spot welding 2) ultrasonic polishing 3) ultrasonic physiotherapy 4) ultrasonic scaler 5) fine bubbles crushed 6) ultrasonic agitation |
| Φ25-Φ10*2 | 900 | 0.3 | 87.0 | ≧0.42 | 800 |
| Φ28*Φ10*3 | 1400 | 0.3 | 59.0 | ≧0.43 | 800 |
| Φ30*Φ10*5 | 1140 | 0.3 | 58.0 | ≧0.44 | 800 |
| Φ32*Φ10*5 | 1255 | 0.3 | 52.7 | ≧0.44 | 800 |
| Φ34*10.5*5 | 1350 | 0.3 | 50.2 | ≧0.45 | 800 |
| Φ34*Φ14*5 | 1390 | 0.3 | 48.5 | ≧0.45 | 800 |
| Φ35*Φ15*5 | 1425 | 0.3 | 46.4 | ≧0.45 | 800 |
| Φ36*Φ15*5 | 1500 | 0.3 | 41.5 | ≧0.45 | 800 | For Medium Power Transducer: 1) Ultrasonic cleaning, 2) ultrasonic descaling 3) ultrasonic extraction 4) phacoemulsification |
| Φ38*Φ15*5 | 1735 | 0.3 | 43.8 | ≧0.45 | 800 |
| Φ40*Φ12*5 | 2075 | 0.3 | 44.6 | ≧0.45 | 800 |
| Φ40*Φ15*5 | 1960 | 0.3 | 42.2 | ≧0.45 | 800 |
| Φ45*Φ15*5 | 2565 | 0.3 | 38.7 | ≧0.45 | 800 |
| Φ50*Φ17*5 | 3150 | 0.3 | 34.6 | ≧0.45 | 800 |
| Φ49*Φ23*6 | 2225 | 0.3 | 32.2 | ≧0.43 | 800 |
| Φ50*Φ17*6.5 | 2425 | 0.3 | 34.6 | ≧0.45 | 800 | For High Power Transducer: 1) Ultrasonic Machining, 2) ultrasonic plastic welding, 3) ultrasonic drilling , 4) ultrasonic oil-water emulsions , 5) Spinneret powerful cleaning |
| Φ49*Φ23*6 | 2340 | 0.3 | 31.8 | ≧0.43 | 800 |
| Φ50*Φ23*6.5 | 2170 | 0.3 | 31.8 | ≧0.43 | 800 |
| Φ60*Φ30*10 | 1925 | 0.3 | 25.8 | ≧0.43 | 800 |
| Φ70*Φ30*10 | 2850 | 0.3 | 22.7 | ≧0.43 | 800 |
| Ultrasonic Atomizing Transducer Contact Us |
If you are interested in our product,
Pls just feel free to send us your inquiry.
We wil try our best to quote the competitive price for you!
Ultrasonic atomizer Related finished module Products:
Our Services
Ultrasonic atomizer Packaging & Shipping
More of ours :ultrasonic atomier Workshop
Ultrasonic Atomizer Transducer FAQ
| 1. Q: When can we get the reply? |
| Any inquiries will be replied within 24 hours. |
| 2. Q: Can i have samples? |
| A: Yes. Sample is surely ok. We can even send you free sample and
you should only pay for the freight fee. |
| 3. Q: What about minimum order quantity? |
| A: We have no limit for MOQ, so you can even buy only 1 piece.
Welcome to buy sample to test first. |
| 4. Q: What about delivery time? |
| A: We will send sample to you within 3 days. |
| Production for big quantity needs 20 to 25 days. And it also
depends on product and quantity. |
| 5. Q: What about terms of payment? |
| A: Payment terms: T/T, west Union, Paypal and L/C etc. |
| 6. Q: How you will send the goods to us? |
| A: We will send the goods to you by Air (DHL, Fedex, UPS, TNT) and
Sea shipping etc. |
| 7. Q: Are you trading company or manufacturer ? |
| A: We are in China buzzer manufactory |
| 8. Q: Do you support OEM and ODM services? |
| A: Yes, surely support. we can customize products according to the
drawing. |
| 9. Q: Can you provide driven circuit? |
| A: Yes, of course sure. |
| 10. Q: Can you solve technical problems for us? |
| A: Yes, Our Technical team will try our best to support you. |
