Piezoelectric Ultrasonic Atomizing Transducer application is for
humidity control
16mm 108khz Piezoelectric Ultrasonic atomizer with electronic
circuit PCB driver
16mm Enameled Mesh Microporous Atomizer Plate
Application: for medical / makeups etcFrequency: 108khz ±5
Aperture: 2-6μm
Feature: food grade material,
professional laser drilling technology,
uniform pore size,
pore through rate over 98%,
atomizate evevly
Ultrasonic Atomizer Transucer Features:
1.It can produce negative ions and atomization at the same time,
can sterilize and deposit smoke.
2.The water mist produced is a cold mist with the effect of cooling
and humidifying the air.
3.Cold fog with a large amount of negative ions can immediately
improve the body's ability to absorb oxygen and emit carbon
dioxide. Combined with drug use, it can play a good auxiliary
therapeutic effect on respiratory diseases and asthma.
4.Through the action of negative ions, the cold mist generated can
not only quickly replenish the moisture required by the skin, but
also avoid the burn, aging and uncomfortable feeling caused by
steaming the face at high temperature. Allows you to nourish brain
cells while grooming, soothing stress, which is good for your
physical and mental health and keeps you young. This product will
release a large amount of negative ions during the ultrasonic
atomization process, combined with the floating smoke and dust in
the air, and electrostatically treated to precipitate and filter
it, which can effectively remove second-hand smoke, formaldehyde,
carbon monoxide, bacteria and other harmful substances and odors.
High concentration of negative ions can effectively kill harmful
bacteria suspended in the air, reduce the occurrence of diseases,
and purify the air. Fresh and natural, to protect human health. For
people in dry areas and air-conditioned rooms, the use of negative
ion fog spring oxygen bar can avoid dry skin, dry eyes, can quickly
relieve nervous tension, eliminate fatigue, and calm the brain,
prevent excessive water loss and water shortage. Accelerate the
phenomenon of aging of life. Scope of application: family,
air-conditioned rooms, beauty salons, hotels, hospitals, offices,
kindergartens, karaoke rooms, etc.
| Ultrasonic Ceramic Atomizing Transducer |
The surface of the Piezo ceramic for atomizing is mainly made of 700-800 °C high-temperature sintering sealing
glass glaze. It is bright and beautiful, has strong acid and alkali
resistance, and its lifetime more than 5,000 hours. The Piezo ceramic for atomizing film produced by our factory has been certified by hundreds of test
experiments, featuring stable performance, small fog particles,
large atomization, acid and alkali corrosion resistance and long
lifetime.
| Ultrasonic Atomizing Transducer Specification |
1. SCOPE
This specification covers the piezoelectric ceramic transducer for
wee atomization. 2. TYPE TM-16MM-108KHZ
3. SPECIFICATION
3.1 DIMENSIONS
As per the drawing No. TM-16-108KHZ
3.2 ELECTRICAL SPECIFICATION
3.2.1 Resonant Frequency (fr) fr = 108kHz±3kHz 3.2.2 Resonant Resistance (Ro)
Ro = max. 150Ω
3.2.3 Capacitance (Cp) Cp =3600pF±15% |
1. SCOPE
This specification covers the piezoelectric ceramic transducer for
wee atomization.
2. TYPE
TM-16-108KHZ
3. SPECIFICATION
3.1 DIMENSIONS
As per the drawing No. TM-16-108KHZ
3.2 ELECTRICAL SPECIFICATION
3.2.1 Resonant Frequency (fr) fr = 108kHz±3kHz
3.2.2 Resonant Resistance (Ro)
Ro = max. 150Ω
Capacitance (Cp) Cp =3600pF±15%
4. TEST PROCEDURE
4.1 TEST ATMOSPHERE 23±3℃ 40 ~ 70%RH.
4.2 Fr AND Ro :
The TH-2818 Impedance Analyzer.
4.3 Cp
LCR meter at 1kHz,1Vrms
5. INPUT FOR TRANSDUCER
MAXIMUM INPUT
Voltage: 60 Vp-p 6,INPUT VOLTAGE
Input Voltage: DC3~5V
7,POWER
Max Input Power 1.5W.
(Normal use 1.5W)
8. Configuration sketch map
Remark: The hole size and quantity can make as your request,this
can change.
(Package)
500PCS/内盒
5000PCS/外箱G.W.:10KGS
1. Standard storage temperature -40℃ 85℃.
2. Do not store in the environment with relative humidity greater
than 75% or containing corrosive gases.
Remark: We will supply the whole set products including PCB..Also
can OEM and ODM as your requirement.
If you are interested in our product,
Pls just feel free to send us your inquiry.
We wil try our best to quote the competitive price for you!
More of ours :ultrasonic atomier Workshop
Ultrasonic Atomizer Transducer FAQ
| 1. Q: When can we get the reply? |
| Any inquiries will be replied within 24 hours. |
| 2. Q: Can i have samples? |
| A: Yes. Sample is surely ok. We can even send you free sample and
you should only pay for the freight fee. |
| 3. Q: What about minimum order quantity? |
| A: We have no limit for MOQ, so you can even buy only 1 piece.
Welcome to buy sample to test first. |
| 4. Q: What about delivery time? |
| A: We will send sample to you within 3 days. |
| Production for big quantity needs 20 to 25 days. And it also
depends on product and quantity. |
| 5. Q: What about terms of payment? |
| A: Payment terms: T/T, west Union, Paypal and L/C etc. |
| 6. Q: How you will send the goods to us? |
| A: We will send the goods to you by Air (DHL, Fedex, UPS, TNT) and
Sea shipping etc. |
| 7. Q: Are you trading company or manufacturer ? |
| A: We are in China buzzer manufactory |
| 8. Q: Do you support OEM and ODM services? |
| A: Yes, surely support. we can customize products according to the
drawing. |
| 9. Q: Can you provide driven circuit? |
| A: Yes, of course sure. |
| 10. Q: Can you solve technical problems for us? |
| A: Yes, Our Technical team will try our best to support you. |
